Malossi Remsegmenten

Home Forums Techniek Overige techniek Malossi Remsegmenten

This topic contains 5 reacties, has 4 deelnemers, and was last updated by Thijs_DR_Evo 4 years, 9 months geleden.

6 berichten aan het bekijken - 1 tot 6 (van in totaal 6)
  • Gebruiker
  • #787616

    sx3-swe
    Topic starter
    Berichten: 293

    Found theese today, are they new on the market or old?
    I have ordered a set for front and rear, lets see how they perform. 🙂

    Couldn’t any info here on VCNL, any one have tested them?

    (It’s Okey if you write in Dutch, I can translate it, hence put this topic outside english section)

    Capture

    #787631

    Herr Flick
    Sleutelbeheerder
    Berichten: 6915

    First time I’ve seen these haha. Nice catch!
    They actually made them yellow, and you will never see them again after mounting.  :mrgreen:

    46 Pinasco, Malossi RV, Schijfrem, Fox Vario
    Gele Racefrikandel
    #788135

    sx3-swe
    Topic starter
    Berichten: 293

    The brakes have arrived.. 🙂
    My first impression is, theese are probably the same as Polini brakes but new color and other package..
    So why would I say that?
    …Because, the casting on the rear brake says it was manufactured “06”/2006 as from reading this post, @wilk1985 noticed the same thing with Polini ones.

    Ferodo remsegment gebruikers ervaring gevraagd?

    IMG_20190628_184654IMG_20190628_184747IMG_20190628_184759

     

    #788205

    sx3-swe
    Topic starter
    Berichten: 293

    I can notice that the pads are glued different from the original..
    Don’t know about Polini or Ferrodo if the are glues the same or different.

    IMG_20190701_193958IMG_20190701_1940118IMG_20190701_194257IMG_20190701_194833

    #788211

    Jochem
    Bijdrager
    Berichten: 186

    WoW that looks Very nice ! 👍
    To bad you don’t see it anymore when fitted.

    are the red springs also stiffer as the orginal ones ?.

    Gr Jochem

    #788230

    Thijs_DR_Evo
    Bijdrager
    Berichten: 269

    The difference in position of the friction material in relation to the carrier is interesting. I assume this is done on purpose at Malossi, which could be related to the self applying effect of brake drums. Might be you can generate more heat/friction with less effort at the handle.

    If I am not mistaken wheel rotation direction is righthanded (in the picture above), which means this is the self applying brake shoe.

6 berichten aan het bekijken - 1 tot 6 (van in totaal 6)

Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.