Freakz SI Perso

Home Forums Perso’s Projecten Freakz SI Perso

Dit onderwerp bevat 295 reacties, heeft 22 stemmen, en is het laatst gewijzigd door MofaFreak87 2 maanden, 3 weken geleden.

15 berichten aan het bekijken - 16 tot 30 (van in totaal 296)
  • Gebruiker
  • #500606

    Crullie
    Donateur
    Berichten: 1743

    Great work again Marc, I see your workingtools Are doing what you want ! :thumb

    I know You make it work in time 😉 Will follow the results . :swinging

    TICKLING BARN
    #500607

    MofaFreak87
    Topic starter
    Berichten: 225

    THX Crullie, my tools are not doing what i want anytime, but sometime hehe

    lets go on. there is no time to waste 🙂
    Im waiting for my mill, without it i cant finish this project 🙁

    for the next steps i need an old kick crankhsaft. a big THX to Erwin, he will give me one WHOOP WHOOP

    i also had to make it here under the rotor a bit deeper, i need as much space i can get.

    @Zevenenergie this is what i mean

    #500608

    zevenenergie
    Forum Goeroe
    Berichten: 2615

    I can see clearly now 😉
    Nice and sturdy crankshaft :thumb
    I assume a hole for the kickstart axis?

    I hope your milling machine comes in quickly,

    Draaiwerk, freeswerk, carters kotteren? Reparatie of tuning?
    Klik hier.
    #500614

    MofaFreak87
    Topic starter
    Berichten: 225

    Today i made the hole aluminium parts from the Rotor new. now it fits like a glove.

    And it sparks for the first time. inkluded 18V DC for light. but my friends told me i have to measure it with a lamp on it 😀
    Tomorrow it goes on with the Kick.

    #500616

    MofaFreak87
    Topic starter
    Berichten: 225

    today it was time for some porting. Damn thats big i think and there is alot of room for more.
    now it needs only some finish.

    #500609

    lightlord
    Donateur
    Berichten: 863

    Very nice project it’s nice to have all these tools to make this :thumb

    Je ware pubertijd duurt je leven lang
    Lightlord's Dizzy/Gypsi
    #500610

    Tiesman1986
    Moderator
    Berichten: 695

    So cool to see all of this ! Thanks for that 😉

    #500611

    MofaFreak87
    Topic starter
    Berichten: 225

    @lightlord: atm its only done with my Dremel and the Lathe 🙂 so not really alot special tools. 😀

    @tiesman: Thx a lot, i think everyone wants to see a building from zero to the finish product.
    specially when its not done by anyone before or respectively it is done before but the people dont show how its made.
    Alot of guys are making a secret out of it, but for what, its just an engine hehe

    #500617

    zevenenergie
    Forum Goeroe
    Berichten: 2615

    So in therorie it could run now, if there was an intake.

    I see, it won,t be a rotating inlet and it won,t be a piston controlled intake.

    So I wonder what kind of intake it could be, you are making.:D:whistle

    Draaiwerk, freeswerk, carters kotteren? Reparatie of tuning?
    Klik hier.
    #500618

    MofaFreak87
    Topic starter
    Berichten: 225

    its gonna be an membran inlet like the Malossi RV.
    It gets also the same position like the RV. but with a bigger Membran.

    today there was some finishing, not perfect but okay. this zylinder is not the last one =)

    the quality is verry bad but i can fix it a little bit
    Original

    now its clean

    now this is looking much better 😀

    #500619

    AA-T
    Sleutelbeheerder
    Berichten: 2442

    Awesome project!
    Good look finishing it, but by the looks of it, that won’t be a problem!
    I will follow your perso 😀

    #500620

    Crullie
    Donateur
    Berichten: 1743

    Nice, looking good :thumb

    For a 49.9cc cilinder these transfers are verry Big =)

    Again a verry good job of you Marc :p

    TICKLING BARN
    #500621

    De Brandweer
    Bijdrager
    Berichten: 598

    This is probably bigger than 49cc?
    Can you tell some more about the membrame?
    Are you going to use something similar to a v-force 3 am6?

    CRAZY stuff man very nice!

    #500622

    speedbuxy
    Bijdrager
    Berichten: 10059

    Damn you work quikly:thumb
    If you keep this up the engine will be running by the end of the month:D

    #500623

    zevenenergie
    Forum Goeroe
    Berichten: 2615

    Wow, it looks perfect to me,:)
    You go very quikly indeed :thumb

    Draaiwerk, freeswerk, carters kotteren? Reparatie of tuning?
    Klik hier.
15 berichten aan het bekijken - 16 tot 30 (van in totaal 296)

Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.