Freakz SI Perso

Home Forums Mijn brommers Projecten Freakz SI Perso

Dit onderwerp bevat 271 reacties, heeft 21 stemmen, en is het laatst gewijzigd door MofaFreak87 4 dagen, 3 uur geleden.

15 berichten aan het bekijken - 256 tot 270 (van in totaal 272)
  • Gebruiker
  • #777587

    Topic starter
    Berichten: 211

    @Flick jou, i think so! But like i said the gearbox ends at 100. before i have to modify my vario a little bit so that my transmission is a bit longer.

    @aa-t: you dont need to, drives very smooth

    @martino: its not the s6 any more, i changed it to a yasuni R i think.
    The C16 runs not that good, for this exhaust the timings need a mm more up i think.


    Berichten: 9826

    You almost getting there, couple of kmph left ๐Ÿ˜ˆ


    Berichten: 10936

    Congrats with the moped of the week award!ย ๐Ÿ˜€


    Berichten: 109

    This is porn!

    Keep up the good work!

    4-takt krijg de tering, ik rij meng-smering!
    Link naar Mijn collectie / Projecten.

    Topic starter
    Berichten: 211

    @speedbuxy: uh jeah, next step NOS haha

    @hansieb: thx mate

    @killernoway: Porn on 2 wheels ๐Ÿ™‚ thx a lot


    Topic starter
    Berichten: 211

    So here some Uodates!

    I changed my Clutch to a Minarelli one and made some parts by myself

    Here a short video

    The difference is soo huge!
    No wobbling any more with the rpm
    its from the start to the endspeed just perfekt!
    now i just need a new belt and set the waights a bit different!

    I will try to produce that for everyone, but not like the italiens for 300โ‚ฌ

    I hope you enjoy the video


    Berichten: 10936

    I also prefer Germany products better then Italian stuff :)!!

    Cool mate, what changes did you make to the clutch ? Any pictures on that.


    Topic starter
    Berichten: 211

    I Changed the direction of the torque drive. But i made only one side, because itโ€™s nearly impossible to do it perfekt on both sides by Hand.
    The gearbox was a 8,5 mono wehre i fit a minarelli gear on.

    i did it before for a Friend. He had ย incedible 22,5ps on a dyno and my shaft didnt die:-)

    that is made in Germany 😂

    The Stage clutch is standard and nothing changed!
    I will bet that this gearbox and vario is on a dr and std carter also a burner!
    The Performance is so much netter now, incredible!

    vorbrations: non!
    The higher The Speed The lower The rpm. With the Standard itโ€™s exakt The Opposide!

    So now itโ€™s Really perfekt!

    I Start with around 10k rpm than it goes up to 11k @ 30-60kmh and than The rpm Gets down to 10k and The is The most power @80kmh

    great! I will make a better Video These days


    Herr Flick
    Berichten: 6352

    Ow my! Nice nice nice. And let us know the price hehe.

    Did you get some topspeeds already now with this new clutch? And gear.

    46 Pinasco, Malossi RV, Schijfrem, Fox Vario
    Gele Racefrikandel

    Berichten: 496

    Very Nice Marc, i hope you get the price lower for the complete kit !
    I mine dreams I hope someone with the tools and the skills to make a complete gearbox.
    Total new one that can handle 30hp.
    Keep up the good work


    Topic starter
    Berichten: 211

    @ Thomas: i think the Topspeed is the same like before, but the acceleration is alot better now.
    @Tiesman: jeah this is also my dream. i would be nice if there is one who can build some hole gearboxes with better gears like that original Crap. in kombination with the minarelli clutch is that the thing you have to have!

    i just ordered a new Belt with 17mm and 1175li
    i have to figure out what is the difference when the belt i running on the outer diamter.
    i also need a nother bushing vor the variator so that the belt can go down.

    i will let you know if there is something new


    Herr Flick
    Berichten: 6352

    Those 17mm belts are also for Ciao size? Please tell me more about the type / product number.

    46 Pinasco, Malossi RV, Schijfrem, Fox Vario
    Gele Racefrikandel

    Topic starter
    Berichten: 211

    They are not exact for a Ciao.
    The problem is that you need more space in the vario for the belt. And these 4mm are a lot. I donโ€™t think that you can use the original plastic covers because they are going to Tuch it.

    i ordered this length without knowing if it fits. I will try and error ๐Ÿ™‚


    Topic starter
    Berichten: 211

    Hey guys,

    its long time ago since i wrote the last time.
    now i got some new or better said some news for you ๐Ÿ™‚

    i modified the front variator – i mounted one from BGM for aerox.
    Why i did this?

    this is easy to tell you.
    With the standard polini or malossi variator for ciao i had the problem that the slope where the rolls are running was different to that one which is for scooters.
    this causes that i had 3 gramm rolls in it and it was still not to light.
    with the new variator im driving now with 5,5 gramm and its running awesome!


    WHOOP WHOOOPP ๐Ÿ™‚ badass difference.

    so its still like i told you.
    we all need that kind of vario setup with the stage 6 Clutch.
    i think i will make these days a nice video with my gopro where you can see how good it is running now ๐Ÿ™‚

    Kind regards
    your Freak ๐Ÿ™‚



    • Deze reactie is gewijzigd 4 dagen, 15 uur geleden door MofaFreak87.

    Berichten: 5262

    Nice Marc, when do you start the production of these vario modification sets in bigger scale… I think there is enough interest in it.

15 berichten aan het bekijken - 256 tot 270 (van in totaal 272)

Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.